Section 25-28 Final plat specifications.
Prior to the adoption of 014482 on 05/15/1995, Section 25-28 read as follows.
(a) The final plat shall be prepared under the supervision
of a registered land surveyor and
attested to by his signature and seal on the plat, in compliance with the current Missouri
Minimum Standards for Property Boundary Surveys, and to the following standards:
(1) Drawn in ink on eighteen-inch
by twenty-four-inch or twenty-four-inch by thirty-six-inch
sheets of single or double matted polyester film or an approved equivalent, at a scale of at least
one (1) inch equals one hundred (100) feet. When necessary the plat may be on several sheets,
accompanied by an index showing the entire subdivision;
(2) The title of the subdivision and
a graphic scale;
(3) A key map showing the entire subdivision
and its relationship to the surrounding area;
(4) Legal description of the property
to be subdivided;
(5) The boundary of the subdivision
may mathematically close to one in ten thousand
(1:10,000), and all interior areas must mathematically close to one in five thousand (1:5,000).
(6) Designation of all lots with lot
numbers and the location of all lot setback lines along
street rights-of-way;
(7) The size of the subdivision and
any lot of one (1) acre or more shall be shown to the
nearest one-hundredth of an acre;
(8) The location and names of all
streets and adjacent subdivision;
(9) The relationship of the boundary
lines to section lines, quarter section lines, and
corporate boundaries;
(10) The location and designation
of all easements;
(11) The location of all existing
buildings on the tract;
(12) Location of all flood-prone areas
(floodway, floodway fringe and/or 100-year flood
plain as delineated on the December 1, 1981, flood hazard boundary map and amendments
thereto);
(13) Reference to any related documents
required to be recorded with the plat;
(14) Restrictions of record on the
property which in the opinion of the director may affect
the division and use of the land as contemplated by the subdivision.
(b) The following certifications shall be shown:
(1) Certification that the survey
was executed in accordance with the current Missouri
Minimum Standards for Property Boundary Surveys;
(2) Certification that the owner is
the legal owner and has given consent to the subdivision
and irrevocable dedication of street rights-of-way, easements, and all land intended for public
use;
(3) Certification of the final plat
approval to be signed by the mayor and attested to by the
city clerk.
(Code 1964, § 19.527; Ord. No. 10099, § 1, 3-5-84; Ord. No. 014482, 5-15-95)