Traveling by bike and bus is a great way to have a healthy, active lifestyle, save money and improve our city's air quality.

Every Columbia Transit bus has a two-unit bicycle rack that is free to use with your bus fare. However, bike racks are available on a first come, first served basis.

Step 1: Let the bus operator know you're loading a bike. Load from the curbside only. Do not step beyond the driver's side of the bus into the traffic lane to load your bike.

Make sure to remove all loose or personal items from your bike before the bus arrives (For example: water bottles, bags, etc.).

Step 2: Pull up on the handle and down on the rack to release the folded bike rack.

For safety reasons, bus operators cannot get off the bus to assist you in the loading or unloading of your bicycle. Bicycles are not allowed inside the bus.

Step 3: Lift your bike onto the rack, fitting the wheels into the slots. Each slot is labeled for front and rear wheels. Your bike must fit securely in the rack in order to be transported.

Recumbent bikes, tandem bikes, three-wheeled bikes and motorized bikes are not allowed on bike racks, as they do not fit safely. 

Step 4: Raise and release the support arm over the top of the front tire. Make sure the support arm is resting on the tire and not on the fender of the bike.

We also recommend trying to sit near the front of the bus so you're able to watch your bike during the ride.

Unloading Your Bike:

Bicycle Disclaimer: